250T/300T Twin Ram Hydraulic machine Hydraulic Track Link Press Machine
300T Twin Ram Hydraulic machine Operation
250tons hydraulic track pin press. Fix different pitches(<228mm) of track links like PC60-PC400, D2-D8 etc
300tons hydraulic track pin press.Fix different pitches(<260mm) of track links like PC60-PC800, D2-D11etc.
Track press description
|
1 |
Hydraulic press |
300T |
|
2 |
RAM SPEED FORWARDS AND REVERSE |
190X2mm |
|
3 |
Worktable Height Adjustment |
825mm |
|
4 |
Motor power |
5.5KW |
|
5 |
PUMP FLOW RATE |
40ML |
|
6 |
PUMP PRESSURE |
36MPa |
|
7 |
Press link machine dimension |
1880X580X1350MM |
|
8 |
HYDRAULIC OIL TANK CAPACITY |
150L |
|
9 |
Voltage |
380V 50Hz three-phase |
|
10 |
Pitches |
≤317mm |
|
11 |
Model | Fit for PC60-PC400,D20-D355,D9N,D10 |
ASSEMBLING OPERATION
①Elements of the chain section in assembling position.
②Link assembling phase.
③Section of assembled chain.
DISASSEMBLING OPERATION
①Section of chain in disassembling position.
②Pushers against pin and bush.
③End phase of the link disassembling.
Track Press machine Assembly and disassembly Operation Pay attention :
1.We must fill antifriction oil into the oil tank before start the operation
2.Please inspect the motor is under the corotation condition (please check the motor corotation mark)
3.Up and down board has been already tuned, please don’t adjust casually
4.When assembling the track link section, please adjust the mold according to the link pitch
5.When disassembling the tracking link, please fit the disassembly head in one side of the cylinder,and use the guard to ward off the track link in other side of the cylinder .
Track press part
Track-press-mold
Assembling mold and disassembling mold Pitch form154,171 ,175,190, 203,216,228,260,280
Track press machine Packing and Shipping
