Excavator Hydraulic Breaker Hammer Chisel
Products description
1. Material: 40Cr or 42CrMo
2. Dimension: Depending on the specification of Tool Maker
3. Chisel type: Moil Point, Blunt Tool, Flat, wedge
4. Heat Treatment:
Austenting Temperature 810~850 (20min/inch)
Cooling Water oil cooling
Tempering 250~300 (1hr/inch)
5. Mechanical Properties:
Surface Hardness HRC51± 3
Core Hardness HRC35± 3
Tensile strength(min) 1250N/mm²
Yield point (min) 950N/mm²
Elongation 10~14%
Reduction of Area 35~40%
Impact work 23~28 ft1b
Grain size 7.0~8.0
Packaging & Shipping
Design and structure
![breaker chisel](http://www.bestpartscn.com/uploads/breaker-chisel.jpg)
We have hydraulic breaker chisel for following items
Krupp | HM45,HM50/60,HM60/75,HM85,HM130/135,HM170/185,HM200,HM300/301, |
HM400/401,HM550,HM560CS,HM580,HM600/601,HM700 | |
RAMMER | S21,S20/22,ROX100,S23,S25,S26/,ROX400,S29,S52/,ROX700, |
S54/700,S55,S56/800,S82/1400 | |
N.P.K | H1XA,H2XA,H3XA,H4X,H6XA,H7X,H8XA,H10XA |
INDECO | MES350,HB5,MES553,MES621,MES1200,HB12,HB19,MES1800,HB27,MES2500 |
MONTABERT | BRH30,BRH40,BRH45,BRH60,BRH76/91,BRP100,BRP130,BRP125,BRH250, |
RH501,BRH620, BRH625,BRH750,BRV32 | |
STANLEY | MB125,MB250/350,MB550,MB656,MB800,MB1550, |
MB1950/1975,MB30EX,MB40EX | |
FURUKAWA | HB05R,HB1G,HB2G,HB3G,HB5G,HB8G,HB10G,HB15G,HB20G |
HB30G,HB40G,HB50G, | |
TOKU/TOYO | TNB1E,TNB2E,TNB4E,TNB6E,TNB7E,TNB14E,TNB22EA,THBB101, |
OKADA | OUB301,OUB302,OUB303,OUB305,OUB308,OUB310,OUB312,OUB316,OUB318, |
SOOSAN | SB10,SB20,SB30,SB35,SB40,SB43,SB45,SB50,SB60,SB70,SB81, |
SB100,SB121,SB130,SB151 | |
KWANGLIM | SG200,SG300,KSG350,SG400,SG600,SG800,SG1200,SG1800,SG2100,SG2500, |
DAEMO | DMB03,DMB04,DMB06,S150-V,S300-V,S500-V,S700-V,S900-V,S1300-V,S1800-V |
HANWOO | RHB301,RHB302,RHB303,RHB304,RHB305,RHB306,RHB308,RHB309,RHB313, |
DAINONG | D30,D50,D60,D70/90,D110,D130,D160,T180,K20 |
K25,K30,K50,K80,K120,K55S,K40S, |